Pug sold.
-
- Tenth Dan Tetris Gnu
- Posts: 6440
- Joined: Wed Apr 10, 2019 6:41 pm
- Has thanked: 410 times
- Been thanked: 2363 times
Re: Pug 406 escapades
The shuddering at around 35 to 43 mph wasnt a vacuum issue as that's returned now. Feels like a misfire if I'm gently accelerating in 4th. No fault codes though so I'm unsure if it could still be a dirty injector or not.
-
- Woke as fuck
- Posts: 2131
- Joined: Wed Apr 10, 2019 10:40 am
- Has thanked: 1090 times
- Been thanked: 565 times
Re: Pug 406 escapades
It's probably shaking with fear, wondering when and how it's demise will take place.
OMG U OK HUN?
- Hooli
- Self Appointed Internet God
- Posts: 34244
- Joined: Mon Apr 08, 2019 9:25 pm
- Has thanked: 14731 times
- Been thanked: 11409 times
Re: Pug 406 escapades
About the speed it'd come on boost? wastegate sticky/warped/loose etc
Private signature, do not read
-
- Tenth Dan Tetris Gnu
- Posts: 6440
- Joined: Wed Apr 10, 2019 6:41 pm
- Has thanked: 410 times
- Been thanked: 2363 times
Re: Pug 406 escapades
Mainly when Im pulling on part throttle like lifting off for a bend in a 30 or 40 zone then accelerating out and it's usually around1600 to 1800 rpm.
-
- Tenth Dan Tetris Gnu
- Posts: 6440
- Joined: Wed Apr 10, 2019 6:41 pm
- Has thanked: 410 times
- Been thanked: 2363 times
Re: Pug 406 escapades
The picasso has been stripped even further today. Injectors,throttle potentiometer and other ancillaries removed off the engine. Taken tow bar off to put up on ebay and then scrapping the picasso.
-
- Woke as fuck
- Posts: 2131
- Joined: Wed Apr 10, 2019 10:40 am
- Has thanked: 1090 times
- Been thanked: 565 times
- Hooli
- Self Appointed Internet God
- Posts: 34244
- Joined: Mon Apr 08, 2019 9:25 pm
- Has thanked: 14731 times
- Been thanked: 11409 times
Re: Pug 406 escapades
If it's throttle position related not speed then I'd try swapping the throttle sensor. I had that once on my 14
Private signature, do not read
-
- Tenth Dan Tetris Gnu
- Posts: 6440
- Joined: Wed Apr 10, 2019 6:41 pm
- Has thanked: 410 times
- Been thanked: 2363 times
Re: Pug 406 escapades
Service today. Air filter and cabin filter were a bit dirty.
I've nect got to buy a new bracket for towbar electrics. Its rusted and held on with cable ties. The wiper arms are coming off to be sprayed satin black. I also want to do the roof rails bit they are plastic coated and faded in the sun. Any tips?- Eddie Honda
- Rainman The Google Fu Master
- Posts: 21873
- Joined: Tue Apr 09, 2019 10:45 pm
- Location: 寄居町
- Has thanked: 13878 times
- Been thanked: 13511 times
- Hooli
- Self Appointed Internet God
- Posts: 34244
- Joined: Mon Apr 08, 2019 9:25 pm
- Has thanked: 14731 times
- Been thanked: 11409 times