building an Exocet kit car - lockdown 1 project creeps into lockdown 2

Talk about your cars etc here. Keep it sort of sensible and on topic please.
Post Reply
-gm-
Posts: 82
Joined: Thu Nov 05, 2020 11:26 pm
Location: chesterlestreet
Has thanked: 18 times
Been thanked: 197 times

building an Exocet kit car - lockdown 1 project creeps into lockdown 2

Post by -gm- »

way back in may 2020, after a month of occupying the days of lockdown with domestic diy, I decided that I needed a bit of a project to keep busy.

a local facebook ad for a spears / reapers mk1 mx5 caught my attention and I went to have a look
95379505_170061307644312_7168922079180357632_n.jpg
95379505_170061307644312_7168922079180357632_n.jpg (389.5 KiB) Viewed 3597 times
a deal was done and the next day, this arrived on my drive
IMG_2030.JPG
IMG_2030.JPG (3.04 MiB) Viewed 3597 times
looks not too bad from that angle but closer examination showed this one wasn't going to see another mot
IMG_2031.JPG
IMG_2031.JPG (2.77 MiB) Viewed 3597 times
this had a clean pass only a year ago :(
IMG_2032.JPG
IMG_2032.JPG (2.77 MiB) Viewed 3597 times
IMG_2046.JPG
IMG_2046.JPG (2.44 MiB) Viewed 3597 times
the future didn't look good for this one
-gm-
Posts: 82
Joined: Thu Nov 05, 2020 11:26 pm
Location: chesterlestreet
Has thanked: 18 times
Been thanked: 197 times

Re: building an Exocet kit car - lockdown 1 project creeps into lockdown 2

Post by -gm- »

so I took it to bits :
IMG_2048.JPG
IMG_2048.JPG (2.17 MiB) Viewed 3592 times
-gm-
Posts: 82
Joined: Thu Nov 05, 2020 11:26 pm
Location: chesterlestreet
Has thanked: 18 times
Been thanked: 197 times

Re: building an Exocet kit car - lockdown 1 project creeps into lockdown 2

Post by -gm- »

a couple of days later
IMG_2100.JPG
IMG_2100.JPG (3.04 MiB) Viewed 3592 times
IMG_2102.JPG
IMG_2102.JPG (1.27 MiB) Viewed 3592 times
-gm-
Posts: 82
Joined: Thu Nov 05, 2020 11:26 pm
Location: chesterlestreet
Has thanked: 18 times
Been thanked: 197 times

Re: building an Exocet kit car - lockdown 1 project creeps into lockdown 2

Post by -gm- »

then took the bits to bits
IMG_2136.JPG
IMG_2136.JPG (2.54 MiB) Viewed 3590 times
IMG_2165.JPG
IMG_2165.JPG (2.42 MiB) Viewed 3590 times
IMG_2171.JPG
IMG_2171.JPG (2.14 MiB) Viewed 3590 times
IMG_2173.JPG
IMG_2173.JPG (2.05 MiB) Viewed 3590 times
treehugger
The only technocripple in the village!
Posts: 10488
Joined: Thu Apr 11, 2019 1:04 pm
Has thanked: 1584 times
Been thanked: 935 times

Re: building an Exocet kit car - lockdown 1 project creeps into lockdown 2

Post by treehugger »

Crikey.
As I suspected I was right about everything.
-gm-
Posts: 82
Joined: Thu Nov 05, 2020 11:26 pm
Location: chesterlestreet
Has thanked: 18 times
Been thanked: 197 times

Re: building an Exocet kit car - lockdown 1 project creeps into lockdown 2

Post by -gm- »

the engine got a good service and a tart up
IMG_2262.JPG
IMG_2262.JPG (2.12 MiB) Viewed 3588 times
IMG_2244.JPG
IMG_2244.JPG (2.99 MiB) Viewed 3588 times
IMG_2329.JPG
IMG_2329.JPG (2.46 MiB) Viewed 3588 times
IMG_2335.JPG
IMG_2335.JPG (2.56 MiB) Viewed 3588 times
-gm-
Posts: 82
Joined: Thu Nov 05, 2020 11:26 pm
Location: chesterlestreet
Has thanked: 18 times
Been thanked: 197 times

Re: building an Exocet kit car - lockdown 1 project creeps into lockdown 2

Post by -gm- »

the manky subframes were stripped and wire wheeled - two days sweating in a dusty garage was no fun but the results were worth it
IMG_2387.JPG
IMG_2387.JPG (1.72 MiB) Viewed 3583 times
IMG_2392.JPG
IMG_2392.JPG (4.11 MiB) Viewed 3583 times
IMG_2398.JPG
IMG_2398.JPG (2.58 MiB) Viewed 3583 times
IMG_2400.JPG
IMG_2400.JPG (2.51 MiB) Viewed 3583 times
then the knackered bushes needed to come out - @paulplom's blowtorch made short (but very stinky) work of that
IMG_2427.JPG
IMG_2427.JPG (2.43 MiB) Viewed 3583 times
IMG_2430.JPG
IMG_2430.JPG (2.33 MiB) Viewed 3583 times
-gm-
Posts: 82
Joined: Thu Nov 05, 2020 11:26 pm
Location: chesterlestreet
Has thanked: 18 times
Been thanked: 197 times

Re: building an Exocet kit car - lockdown 1 project creeps into lockdown 2

Post by -gm- »

once I'd cleaned up the garage, it was time for a bit of painting
IMG_2576.JPG
IMG_2576.JPG (2.46 MiB) Viewed 3580 times
IMG_2577.JPG
IMG_2577.JPG (2.14 MiB) Viewed 3580 times
IMG_2578.JPG
IMG_2578.JPG (2.19 MiB) Viewed 3580 times
and some fancy pollybushes
IMG_2581.JPG
IMG_2581.JPG (2.08 MiB) Viewed 3580 times
IMG_2601.JPG
IMG_2601.JPG (2.28 MiB) Viewed 3580 times
-gm-
Posts: 82
Joined: Thu Nov 05, 2020 11:26 pm
Location: chesterlestreet
Has thanked: 18 times
Been thanked: 197 times

Re: building an Exocet kit car - lockdown 1 project creeps into lockdown 2

Post by -gm- »

and re-assembly could begin
IMG_2636.JPG
IMG_2636.JPG (2.07 MiB) Viewed 3580 times
IMG_2640.JPG
IMG_2640.JPG (2.27 MiB) Viewed 3580 times
(depowered) steering rack fitted and rough tracking set
IMG_2648.JPG
IMG_2648.JPG (1.96 MiB) Viewed 3580 times
-gm-
Posts: 82
Joined: Thu Nov 05, 2020 11:26 pm
Location: chesterlestreet
Has thanked: 18 times
Been thanked: 197 times

Re: building an Exocet kit car - lockdown 1 project creeps into lockdown 2

Post by -gm- »

engine, gearbox and front subframe re-united
IMG_2049.JPG
IMG_2049.JPG (1.51 MiB) Viewed 3579 times
IMG_2050.JPG
IMG_2050.JPG (1.47 MiB) Viewed 3579 times
IMG_2052.JPG
IMG_2052.JPG (1.17 MiB) Viewed 3579 times
IMG_2061.JPG
IMG_2061.JPG (1.4 MiB) Viewed 3579 times
IMG_2066.JPG
IMG_2066.JPG (1.51 MiB) Viewed 3579 times
Post Reply