Roland's trials and tribulations

Talk about your cars etc here. Keep it sort of sensible and on topic please.
Post Reply
bub2006
Tenth Dan Tetris Gnu
Posts: 6229
Joined: Wed Apr 10, 2019 6:41 pm
Has thanked: 387 times
Been thanked: 2279 times

Re: Roland's trials and tribulations

Post by bub2006 »

It certainly runs better now though. Think I'll leave it as is until I can afford the carb rebuild kit and I'll use the spare carb I have too.
bub2006
Tenth Dan Tetris Gnu
Posts: 6229
Joined: Wed Apr 10, 2019 6:41 pm
Has thanked: 387 times
Been thanked: 2279 times

Re: Roland's trials and tribulations

Post by bub2006 »

And that float bowl is definitely wonky!
bub2006
Tenth Dan Tetris Gnu
Posts: 6229
Joined: Wed Apr 10, 2019 6:41 pm
Has thanked: 387 times
Been thanked: 2279 times

Re: Roland's trials and tribulations

Post by bub2006 »

I've just had an awful idea. I have 2 HS2 carbs. Twin carb conversion?
DodgeRover
Posts: 13706
Joined: Sun Apr 14, 2019 11:24 pm
Has thanked: 1820 times
Been thanked: 2697 times

Re: Roland's trials and tribulations

Post by DodgeRover »

Yes that's an awful idea, sort out what you have first.
Maybe add an extra radiator to get your capacity back?
bub2006
Tenth Dan Tetris Gnu
Posts: 6229
Joined: Wed Apr 10, 2019 6:41 pm
Has thanked: 387 times
Been thanked: 2279 times

Re: Roland's trials and tribulations

Post by bub2006 »

It is an awful idea as it would mean more work and fuel economy loss. The capacity isn't the issue,it's not having an expansion bottle that is an issue which was rectified on later ones and a common retrofit on earlier models. I've got a copper pipe in place of heater rad so a heater rad may not be a too bad an idea. Off down to mfn tonight so will see. It seems to be behaving so far. Also had inlet manifold off tonight to see if it had the port mods done as the previous owner was unsure if it had or not. It has been done which explains why it's quite nippy and decent amount of shove for a small engine
DodgeRover
Posts: 13706
Joined: Sun Apr 14, 2019 11:24 pm
Has thanked: 1820 times
Been thanked: 2697 times

Re: Roland's trials and tribulations

Post by DodgeRover »

A set of mikunis on it would probably make it get up and go a bit better ( if you were playing with carbs ) and you would probably be able to pick up s set that were here about right for that capacity engine.

Fingers crossed for the run out!
bub2006
Tenth Dan Tetris Gnu
Posts: 6229
Joined: Wed Apr 10, 2019 6:41 pm
Has thanked: 387 times
Been thanked: 2279 times

Re: Roland's trials and tribulations

Post by bub2006 »

I'm here,it's running fine. Not fucking about with carbs while it's working, no point. I've got a ford and a vw carb in shed if I feel like fucking around but it's behaving. Sits at 60 fine no noises or smoke.
bub2006
Tenth Dan Tetris Gnu
Posts: 6229
Joined: Wed Apr 10, 2019 6:41 pm
Has thanked: 387 times
Been thanked: 2279 times

Re: Roland's trials and tribulations

Post by bub2006 »

Home made expansion bottle made and fitted. Near invisible right there. Joys of a rat.
IMG-20190717-WA0002.jpeg
IMG-20190717-WA0002.jpeg (847.42 KiB) Viewed 4538 times
User avatar
Hooli
Self Appointed Internet God
Posts: 33419
Joined: Mon Apr 08, 2019 9:25 pm
Has thanked: 14285 times
Been thanked: 11083 times

Re: Roland's trials and tribulations

Post by Hooli »

Roland's ALIVE!

/Brian Blessed
Private signature, do not read
The Reverend Bluejeans
Prize Cunt
Posts: 6314
Joined: Wed Apr 10, 2019 6:31 pm
Location: Big Al Granvia’s armpit.
Has thanked: 718 times
Been thanked: 2334 times

Re: Roland's trials and tribulations

Post by The Reverend Bluejeans »

Got a booster pack? I'd better jump start War Rocket Ajax m8.
Post Reply