Roland's trials and tribulations
-
- Tenth Dan Tetris Gnu
- Posts: 6245
- Joined: Wed Apr 10, 2019 6:41 pm
- Has thanked: 388 times
- Been thanked: 2287 times
- Hooli
- Self Appointed Internet God
- Posts: 33496
- Joined: Mon Apr 08, 2019 9:25 pm
- Has thanked: 14316 times
- Been thanked: 11106 times
-
- Tenth Dan Tetris Gnu
- Posts: 6245
- Joined: Wed Apr 10, 2019 6:41 pm
- Has thanked: 388 times
- Been thanked: 2287 times
- Hooli
- Self Appointed Internet God
- Posts: 33496
- Joined: Mon Apr 08, 2019 9:25 pm
- Has thanked: 14316 times
- Been thanked: 11106 times
-
- Tenth Dan Tetris Gnu
- Posts: 6245
- Joined: Wed Apr 10, 2019 6:41 pm
- Has thanked: 388 times
- Been thanked: 2287 times
- Hooli
- Self Appointed Internet God
- Posts: 33496
- Joined: Mon Apr 08, 2019 9:25 pm
- Has thanked: 14316 times
- Been thanked: 11106 times
-
- It's S small i C
- Posts: 9364
- Joined: Sun Apr 28, 2019 8:59 am
- Has thanked: 1824 times
- Been thanked: 5389 times
Re: Roland's trials and tribulations
Pipe it to under the seats in the foam as heated seats?
Or you're redoing the wiring, trailer flex is cheap and water resistant. Plus decent stuff should be UV resistant. Should work well for the wiring loom - especially for the loom to the rear lights and the like.
Or you're redoing the wiring, trailer flex is cheap and water resistant. Plus decent stuff should be UV resistant. Should work well for the wiring loom - especially for the loom to the rear lights and the like.
-
- Tenth Dan Tetris Gnu
- Posts: 6245
- Joined: Wed Apr 10, 2019 6:41 pm
- Has thanked: 388 times
- Been thanked: 2287 times
Re: Roland's trials and tribulations
That's an idea. Have some sheathing to run all cabling through already but need to sort out lengths,how many colours and all connectors then we good to rebuild!
-
- Tenth Dan Tetris Gnu
- Posts: 6245
- Joined: Wed Apr 10, 2019 6:41 pm
- Has thanked: 388 times
- Been thanked: 2287 times
Re: Roland's trials and tribulations
Paint now applied. Ronseal does exactly what it says on the tin
- Hooli
- Self Appointed Internet God
- Posts: 33496
- Joined: Mon Apr 08, 2019 9:25 pm
- Has thanked: 14316 times
- Been thanked: 11106 times
Re: Roland's trials and tribulations
I'll leave Bub to update this properly, but total rewire now complete after two day's work. Even better, everything works bar the charge light (see the stupid questions thread).
Oddly it appears to have about half the wiring it had before, god knows what the rest was for...
Oddly it appears to have about half the wiring it had before, god knows what the rest was for...
Private signature, do not read