My car has fallen foul to the terror that all car enthusiasts have
The starlet has gained a rust problem if anyone can advise me on what to do it would be much appreciated
Many thanks
Paran
Really bad rust problem
-
- Posts: 47
- Joined: Thu May 23, 2019 10:05 pm
- Has thanked: 29 times
- Been thanked: 77 times
Really bad rust problem
- Attachments
-
- image.jpg (2.65 MiB) Viewed 7358 times
-
- image.jpg (1.82 MiB) Viewed 7358 times
-
- image.jpg (2.19 MiB) Viewed 7358 times
-
- It's S small i C
- Posts: 9371
- Joined: Sun Apr 28, 2019 8:59 am
- Has thanked: 1826 times
- Been thanked: 5404 times
Re: Really bad rust problem
Really bad rust problems?! You haven't seen what a bad one looks like my son!
Has the rust in the middle picture perforated or is it just under the paint?
Has the rust in the middle picture perforated or is it just under the paint?
-
- Posts: 47
- Joined: Thu May 23, 2019 10:05 pm
- Has thanked: 29 times
- Been thanked: 77 times
- mercrocker
- Numb3rP14t3Fun
- Posts: 17059
- Joined: Fri May 17, 2019 2:53 pm
- Has thanked: 12287 times
- Been thanked: 8701 times
Re: Really bad rust problem
Tear it down and rebuild it. Alternatively, carefully scrape back the paint to a solid area, get it back to bare metal as much as you can. I would use Vactan - a milky substance I have good results with. It will turn the rusty, pitted metal black - you can then apply a skim of filler, plug any perforations with a 2 pack filler (I use Quiksteel), coat with a good zinc primer followed by the red topcoat.
If you are keeping the car you would want to get on this whilst the ambient temperature is a help. Just take your time if you are new to it and don't over-worry about the finish. The aim is to stop the rust getting worse (it will) and keep the weather out.
Ideally you would want any metal repair to be welded but the above course of action will not require any future welding to be any more expensive than it already is if you get my meaning. A small, if not totally professional, repair now will not stop the wing rotting elsewhere but extend the life of the car between costly repairs....
If you are keeping the car you would want to get on this whilst the ambient temperature is a help. Just take your time if you are new to it and don't over-worry about the finish. The aim is to stop the rust getting worse (it will) and keep the weather out.
Ideally you would want any metal repair to be welded but the above course of action will not require any future welding to be any more expensive than it already is if you get my meaning. A small, if not totally professional, repair now will not stop the wing rotting elsewhere but extend the life of the car between costly repairs....
There's a great long bar in Rock & Roll heaven.......
- John F
- Posts: 2584
- Joined: Wed Apr 10, 2019 1:52 pm
- Location: Yr Hen Ogledd
- Has thanked: 447 times
- Been thanked: 553 times
Re: Really bad rust problem
I decided long ago that the only permanent repair means welding.
Anything else is only delaying the inevitable.
Anything else is only delaying the inevitable.
On the road:
1998 Disco 4.0 V8 (manual)
1994 Vauxhall Calibra 3.0 V6
Running but need fettling:
1986 Honda CBX750F
1991 Maserati 222 SE
1990 Yamaha XJ900F
Tax & MOT-exempt, woohoo!
1982 Suzuki GSX1100SZ Katana
1998 Disco 4.0 V8 (manual)
1994 Vauxhall Calibra 3.0 V6
Running but need fettling:
1986 Honda CBX750F
1991 Maserati 222 SE
1990 Yamaha XJ900F
Tax & MOT-exempt, woohoo!
1982 Suzuki GSX1100SZ Katana
- Hooli
- Self Appointed Internet God
- Posts: 33535
- Joined: Mon Apr 08, 2019 9:25 pm
- Has thanked: 14335 times
- Been thanked: 11127 times
Re: Really bad rust problem
Mercrocker's comment is roughly my plan on the rough rear corners on the XJR, welding etc can wait a few years. I do need to get under it with a large tin of underseal though before anything important goes crusty.
Private signature, do not read
- Scruffy Bodger
- TeeShirtFun
- Posts: 5327
- Joined: Mon May 27, 2019 9:18 pm
- Has thanked: 8122 times
- Been thanked: 2423 times
Re: Really bad rust problem
Did you order any Vactan yet Paz? That'll hold it off for a bit and I'm sure I'll be able to stitch in a repair at some point.
-
- Woke as fuck
- Posts: 2131
- Joined: Wed Apr 10, 2019 10:40 am
- Has thanked: 1090 times
- Been thanked: 565 times
Re: Really bad rust problem
Get it sand blasted. Only way to get the rust out of the top surface. But if its underneath too then as JohnF says, cut it out and weld a patch on it unless it can be accessed from behind by the sand blaster.
I`ve got a sand blaster but am rather busy for the foreseeable future but if I get a spare day I`ll let you know. Just moved house plus taking over a new business so messing with cars is something I now used to do...
Or just leave it for now. If its going to need welding then leaving a bit longer won`t hurt it.
I`ve got a sand blaster but am rather busy for the foreseeable future but if I get a spare day I`ll let you know. Just moved house plus taking over a new business so messing with cars is something I now used to do...
Or just leave it for now. If its going to need welding then leaving a bit longer won`t hurt it.
OMG U OK HUN?
- fried onions
- Posts: 3316
- Joined: Wed Apr 10, 2019 6:29 pm
- Location: In my safe space (the garage).
- Has thanked: 1449 times
- Been thanked: 2372 times