What did you do today?

Post by **Hooli** » Mon Oct 02, 2023 6:18 pm

Fucking wing vent pervert

I wouldn't ban you, we'd all miss the Bella stories n pics.

LynehamHerc · Post by **LynehamHerc** » Mon Oct 02, 2023 6:24 pm

Has that replaced people sticking their cocks up exhaust pipes now?

xtriple · Post by **xtriple** » Mon Oct 02, 2023 6:44 pm

What, wing vents?

LynehamHerc · Post by **LynehamHerc** » Mon Oct 02, 2023 6:51 pm

Post by **paulplom** » Tue Oct 03, 2023 3:34 am

Hooli wrote: ↑Mon Oct 02, 2023 6:18 pm Fucking wing vent pervert

You need to add that as his sig instead of dog fondler.

Split_Pin · Post by **Split_Pin** » Tue Oct 03, 2023 10:03 am

The TT is stil leaking fuel. I can't seem to get the jubilee clip tight enough on the connector, no matter how hard I try.

This really needs to stop being my Mrs daily as it ideally needs a lot of small jobs doing. I'm either working or she's using it though so getting the time is near impossible.

Really frustrating.

SiC · Post by **SiC** » Tue Oct 03, 2023 11:34 am

Iirc you replaced the fuel hose - definitely sure you have the right diameter fuel hose? Especially metric Vs imperial sizes as they can be close but not the same. Fuel hose clamps may offer better clamping then a jubilee clip too.

SiC · Post by **SiC** » Tue Oct 03, 2023 12:49 pm

Local car part shop is closing. Not that I used them that often as never really had much in and went to one further afield.
Probably more interested to PhilA than anyone else.

Split_Pin · Post by **Split_Pin** » Tue Oct 03, 2023 1:03 pm

SiC wrote: ↑Tue Oct 03, 2023 11:34 am Iirc you replaced the fuel hose - definitely sure you have the right diameter fuel hose? Especially metric Vs imperial sizes as they can be close but not the same. Fuel hose clamps may offer better clamping then a jubilee clip too.

Yeah 5mm ID and it was tight to go on. I'd like to do them in copper with just the ends in rubber ans they can bend more easily and approach the joins straight, which is the problem.

SiC · Post by **SiC** » Tue Oct 03, 2023 1:36 pm

Split_Pin wrote: ↑Tue Oct 03, 2023 1:03 pm
SiC wrote: ↑Tue Oct 03, 2023 11:34 am Iirc you replaced the fuel hose - definitely sure you have the right diameter fuel hose? Especially metric Vs imperial sizes as they can be close but not the same. Fuel hose clamps may offer better clamping then a jubilee clip too.
Yeah 5mm ID and it was tight to go on. I'd like to do them in copper with just the ends in rubber ans they can bend more easily and approach the joins straight, which is the problem.

Googling brings up 7.5mm or some have used 5/16" (8mm). If so possibly 5mm is too tight and stretching it out too far?

What did you do today?

Re: What did you do today?

Re: What did you do today?

Re: What did you do today?

Re: What did you do today?

Re: What did you do today?

Re: What did you do today?

Re: What did you do today?

Re: What did you do today?

Re: What did you do today?

Re: What did you do today?