It would appear that my mot is due today - better get this thing finished
building an Exocet kit car - lockdown 1 project creeps into lockdown 2
- paulplom
- The Geordie Lord, Mario!
- Posts: 26174
- Joined: Fri Aug 23, 2019 7:01 am
- Has thanked: 10323 times
- Been thanked: 5511 times
Re: building an Exocet kit car - lockdown 1 project creeps into lockdown 2
Have you decided on a body colour?
- AutoshiteBoy
- Posts: 3003
- Joined: Mon Apr 22, 2019 12:51 pm
- Has thanked: 1158 times
- Been thanked: 720 times
Re: building an Exocet kit car - lockdown 1 project creeps into lockdown 2
They're a good outfit. I used to go on technical training days away with them and still use their vans.
-
- Banned Grinch!
- Posts: 2344
- Joined: Wed Apr 10, 2019 2:16 pm
- Location: Reigate, Surrey
- Has thanked: 2135 times
- Been thanked: 506 times
- paulplom
- The Geordie Lord, Mario!
- Posts: 26174
- Joined: Fri Aug 23, 2019 7:01 am
- Has thanked: 10323 times
- Been thanked: 5511 times
Re: building an Exocet kit car - lockdown 1 project creeps into lockdown 2
Well, nose cone, mud guards and stuff.
-
- Posts: 82
- Joined: Thu Nov 05, 2020 11:26 pm
- Location: chesterlestreet
- Has thanked: 18 times
- Been thanked: 197 times
Re: building an Exocet kit car - lockdown 1 project creeps into lockdown 2
ah, these bits ?
I thought you'd seen them already
handsome beast, no ?
hopefully will look better on the car (and not covered in a thick layer of dust)
I thought you'd seen them already
handsome beast, no ?
hopefully will look better on the car (and not covered in a thick layer of dust)
-
- Posts: 82
- Joined: Thu Nov 05, 2020 11:26 pm
- Location: chesterlestreet
- Has thanked: 18 times
- Been thanked: 197 times
Re: building an Exocet kit car - lockdown 1 project creeps into lockdown 2
a couple of jobs ticked off the list yesterday
the accelerator pedal is mounted on a bracket that sits about an inch off the firewall and has tends to flex when you are going full beans - it is not unusual for the metal to fatigue and crack there so time for a bodge
three handy spacers and an m6 bolt later and it's solid as a rock
then it was back to that sodding wiring
worryingly, this took over an hour to do
then another coat of piss weak paint on those callipers
the accelerator pedal is mounted on a bracket that sits about an inch off the firewall and has tends to flex when you are going full beans - it is not unusual for the metal to fatigue and crack there so time for a bodge
three handy spacers and an m6 bolt later and it's solid as a rock
then it was back to that sodding wiring
worryingly, this took over an hour to do
then another coat of piss weak paint on those callipers
-
- Posts: 82
- Joined: Thu Nov 05, 2020 11:26 pm
- Location: chesterlestreet
- Has thanked: 18 times
- Been thanked: 197 times
Re: building an Exocet kit car - lockdown 1 project creeps into lockdown 2
when I collected the kit, the mirrors were stuck on a slow boat from china - they arrived last week and are sitting near the top of the to-do pile
these serve as the primary front indicators, apparently ok for the iva
and these are side repeaters - neat but I may fit something a bit bigger / brighter
these serve as the primary front indicators, apparently ok for the iva
and these are side repeaters - neat but I may fit something a bit bigger / brighter
- paulplom
- The Geordie Lord, Mario!
- Posts: 26174
- Joined: Fri Aug 23, 2019 7:01 am
- Has thanked: 10323 times
- Been thanked: 5511 times
- Scruffy Bodger
- TeeShirtFun
- Posts: 5329
- Joined: Mon May 27, 2019 9:18 pm
- Has thanked: 8125 times
- Been thanked: 2423 times
Re: building an Exocet kit car - lockdown 1 project creeps into lockdown 2
Bulkhead thank you very much. We have enough keeping on top of SiC with his Americanisms, windshields etc Unless you're PhilA or Broccoli etc