Re: Land Rover Rustorashun and other shit
Posted: Fri Nov 06, 2020 11:43 pm
last part for tonight
Fitted up the sideframes and windscreen rail to the bulkhead and chassis all needs to come off repeatedly to weld but this is essential to get things in the right place. happy so far finishing up the a-post - all this effort was really to save the complete and intact rubber seal channel which is tricky to replicate. I have done it but it is a ballsacre. anyway sheet steel is cheaper than repair sections so... A tinsy bit of distortion ijn the bottom corner, but until I am ready to weld this to the sill it will stay like this. When I weld it may need a small slice with the 1mm cutting disc and a reweld. B post on the passenger side back to factory with rot and bodges cut out. Not seen one this good in a while starting to build up the complex structure as per factory. Attached back onto chassis, a-post I am happy with. I just need to weld in the tubes for the door hinge bolts until next time
loads more on the channel https://www.youtube.com/channel/UCuPaTT ... _4ypXxY0lQ
Fitted up the sideframes and windscreen rail to the bulkhead and chassis all needs to come off repeatedly to weld but this is essential to get things in the right place. happy so far finishing up the a-post - all this effort was really to save the complete and intact rubber seal channel which is tricky to replicate. I have done it but it is a ballsacre. anyway sheet steel is cheaper than repair sections so... A tinsy bit of distortion ijn the bottom corner, but until I am ready to weld this to the sill it will stay like this. When I weld it may need a small slice with the 1mm cutting disc and a reweld. B post on the passenger side back to factory with rot and bodges cut out. Not seen one this good in a while starting to build up the complex structure as per factory. Attached back onto chassis, a-post I am happy with. I just need to weld in the tubes for the door hinge bolts until next time
loads more on the channel https://www.youtube.com/channel/UCuPaTT ... _4ypXxY0lQ